The meaning of Hand Built! ("Aka Built to order")

Ok kiddies, I updated some of the options with the bars mostly pull down/ roll back of the top bar & top bar length. Keep in mind one of the reasons to wait for my "built to order" bars is the fact that they are not just some off the shelf one size fits all made in China B.S... If you are diggin my bars but want them just slightly different to suit your build as in dimensions, pull back/ pull down, knurling distance, or what ever. Give me a call or shoot me an email and I will try to work some thing out that will work for you. That is the benefit of not being part of a mass produced big box chain! Check out our some of our products & services on the right column of the blogs under product!

Hot, hot, hot off the presses!

 Ladys and Gentle Worms I present for your viewing displeasure (I hope) a short tale about a flaming shitter! Its been a crazy week. But then again coming in to work on Tuesday morning only to find your bathroom engulfed in flames will do that! There were 9 fire extinguishers emptied and some hose water to boot by the time the Fire Department showed up! But we are very lucky no one got hurt, no tool or product damage, and no vehicle loss. Just a few magazines, some tp, and hand soap. Oh yeah and the entire bathroom!!! 

http://m.citizentimes.com/apps/pbcs.dll/article?AID=2010101116020

Fork Shavin!

Ok here's the the deal for $200 Plus Shipping . I will take your dirty scared up legs. And shave the fender tabs (and brake tabs if desired) off and polish them to the hilt. Send em or random hate mail to Deep Six Cycles, 12 London Rd, Asheville Nc, 28803

Leave Or Shave Brake Tabs

Shave Brake Tabs Off Leave Brake Tabs

Support Kennedy Chopper Class (AKA Mr. "Teach" does it again!)

  Knuckle Shuffle run for The Kennedy Chopper Class!!! Any cats that can make this should attend. For one it is going to own. For two it goes to some thing most of us wish we had access to in high school! Show your support if you can! I stole this off the Knuckle Shuffle run link.Check out the link below.

About the Ride

The purpose of this ride is to raise money for the Kennedy High School Chopper Class.  Every year Kevin “Teach” Baas reaches out to the motorcycle industry to help support his class.  This ride is dedicated to him and his class to ease the burden and keep the chopper class alive!  Please Join us for this ride and enjoy some of the coolest scooters around.  All bikes are welcome, of course we are dedicating this ride to the vintage iron and keeping history alive!  Just remember this is a old school ride, pack your sleeping bag, pack your tent and prepare for a fun. So come join us!
There will be two routes one leaving from The Ole Piper Inn, Lakeville, MN and the other from Milwaukee, Wisconsin. Both rides will converge on Yuba, Wisconsin, where we will meet at the Full Throttle Bar.  We will have a street party, bands, burnouts and fun. Sunday a Plant tour of S&S Cycle. in Viola, WI will be available for those who registered.
Price will be $25 per person all proceeds will go to Kennedy High School chopper class to help the kids build the choppers!
Remember “Its for the Kids”
Follow on facebook at http://www.facebook.com/event.php?eid=157137007658306&ref=ts

http://theknuckleshuffle.com/

http://www.kennedychopperclass.com/

The End of an Era...

 We had a great Halloween show! I really want to thank every one who helped to make it happen. As some of you may know this was a benefit for the Prison Books program. Being a volunteer run program they depend heavily on  benefits such as this one.
  Unfortunately, all good things must come to an end. We had a lot of wonderful people and I had a hell of a time myself. But the actions of a few have ruined it for every one. Mostly the graffiti on my landlords building across the street and a few other things... 

 It was fun while it lasted! And thank you to all the bands that have played here, and the folks that have organized shows in the past. It was nice to have a chance to give something back.

 On a side note if you know any thing about the graffiti it almost cost me my space. And we are on thin ice with our land lord now. I have faith that all will smooth over in time. But any info would be appreciated. We will also be reviewing the video from their security camera for clues as to who may have been involved. 

 Also who ever stole my girlfriends pick up from The Get Down this week end we are looking for you as well!!! And you punks can't drive worth a damn. With in about 20 seconds I had the truck unstuck with no pushing, digging or pulling. I hope you enjoyed our Stun Guns tape you decided to listen to during your adventure. Just one more security tape to review... I hope I can see your face you dumb shit!

Deep Six Cycles Hourglass Bars!

Our signature series Hourglass bars. Only at Deep Six Cycles!

  Available in 1" or 7/8". With pull down, Pull back, or a combination of the two. Available in Powder coat or raw dog. The top bar on our Win bars tend to be 22" across so if you would like alittle more length just let us know when you order.
  All our bars are built to order. What this means is that we don't mass produce anything. When your order comes in we begin production. The great thing about this is since we are building a set of bars for you specifically. Minor tweaks and adjustments can be made for no additional cost!

 

Finish

Raw $125.00 Powder Coat $150.00 Chrome $250.00

Sizes

10" Rise 8" Rise 6" Rise

1"- 7/8" Bar Size

1" 7/8"

Pull Back/ Pull Down

None 15 Degree pull back 30 Degree Pull Down

Deep Six Cycles Win Bars!

Our Win Bars!

Available in 1" or 7/8". With pull down, Pull back, or a combination of the two. Available in Powder coat or raw dog. The top bar on our Win bars tend to be 22" across so if you would like alittle more length just let us know when you order.
  All our bars are built to order. What this means is that we don't mass produce anything. When your order comes in we begin production. The great thing about this is since we are building a set of bars for you specifically. Minor tweaks and adjustments can be made for no additional cost!

Finish

Raw $100.00 Powder Coat $125.00 Chrome $225.00

Sizes

4" Rise 6" Rise 8" Rise 10" rise

1"- 7/8" Bar Size

1" 7/8"

Pull Back/ Pull Down

None 15 Degree pull back 30 Degree Pull Down 15 Degree Pull Down Pull Down & Back (Contact Me To Specify)

Deep Six Cycles Tri Win Bars!

Here are some of the other bars we offer.

  Tri Win Bars. Available in 1" or 7/8". With pull down, Pull back, or a combination of the two. Available in Powder coat or raw dog. The top bar on our Win bars tend to be 22" across so if you would like alittle more length just let us know when you order.
  All our bars are built to order. What this means is that we don't mass produce anything. When your order comes in we begin production. The great thing about this is since we are building a set of bars for you specifically. Minor tweaks and adjustments can be made for no additional cost!

Finish

Raw $100.00 Powder Coat $125.00 Chrome $225.00

Sizes

4" Rise 6" Rise 8" Rise 10" rise

1"- 7/8" Bar Size

1" 7/8"

Pull Back/ Pull Down

None 15 Degree pull back 30 Degree Pull Down 15 Degree Pull Down Pull Down & Back (Contact Me To Specify)

Money Machining Nightmare! (Aka Ron Trock King of the Ironheads)

 
I have had these Nos Trock big bore jugs on the shelves for years now. Since this Ironhead motor seems to want every thing new any how Im dreamin, plotting and planning... 
   

Be there, or be square!!! (AKA- Fair Warning)

Another great show at the shop!

With a hell of a finale!

Cafe bump stop seat for Briton Bees.

  A little while back I was asked to make a Cafe style Bump Stop seat for an up coming project from Briton Bees. I never did snap a picture of it when I finished up the tin since it was late and my camera pretty much only works in the day light... I hand worked 16ga into what you see here. The bump stop was a lot of fun and I learnt a lot along the way. Its nice to have an excuse to beat on tin. I tend to find my self avoiding it. p.s. the upholstery was out sourced to some one that does it every day.

You can find Briton Bees her.-  http://britonbees.com/
It was a really great working with these guys! I'm looking forward to the next time! Great cats for sure!

A Prayer For Cool! (Aka Ole Clutch Monkey's Done it Again)

a prayer for cool from Marc Bencivenga on Vimeo.

I borrowed this Video from http://www.clutchmonkey.com/. Great cats, good humor, excellent work!

American Made with pride!!

We feel very strongly about this topic! Which is why I started this thread (see link below)! We may sell some items from over seas none of them will ever say Deep Six Cycles on them!!
http://www.chopcult.com/forum/showthread.php?t=2472

Cycle Source!

Check us out on the Cycle Source "Buy American Blog"!

http://cyclesourcebuyamerican.blogspot.com/

Stolen Triumph Alert!

 This bike was stolen from a B.P. Station on Patten Ave. Here in Asheville. There is a reward for any information leading to the return of this 1972 Triumph Daytona. Any one seeing this motorcycle please contact the owner at 377.854. No Questions Asked he just wants his bike back! The vin is x641576t100r

 I got an email this afternoon, so here's an update on the situation!-
 "I'm happy to report that I recovered my bike no worse for wear than it is missing its plate!  Best possible scenario; some n'er-do-well got tired of pushing it up hill and stashed it behind an apt. building, covered with a tarp.  I'm now the proud owner of a new tarp!"

"Beat on the Brat"

This is a sneak peak of a "Brat Style" XS I did the tail section on. The owner cleaned off all the unnecessary tabs himself. Since he is trying to do as much work on his own as he can on his own. It is shaping up but there are still some minor loose ends. Keep an eye in our direction for the end result!

Tall stack!

14" hourglass bars! A little taller and wider than our average. I dig em! $150 powder coated.

Sweepin!

 These are a custom variation of our Win Bars. We made these by request for a 33er. Narrow as hell  and just the ticket!

Lee Bender. A tale of a Skater/ Chopper Jockeys battle with M.S.

  I asked Lee to wright a little something about him self for the blog and this is what he had to say.

 Im long winded, so ill keep it bare bones for sure.
lee bender, skateboarder, multiple sclerosis customer. workin on raising some money to pay for an illegal procedure to possibly cure m.s. in Katowice Poland sometime in 2011. need 11 grand, already raised 2500. still need 8500. trying to hold onto my car, but have a car to sell if necessary.

skateboarder first. 8.25x32, indy 149s, oj 60mm wheels no risers. ride and change the oil on my evo sporty chop. it starts everytime and goes everywhere. recently from Indianapolis to Denver, thru the mountains on highway50 down thru monument valley, blasted thru Barstow, down into San Bernardino over to Hollywood and long beach. up the coast to sf on the pch. only problems where getting struck by lightening in the Rockies at 12,000 feet, a worn out chain and a bald tire once i got to my new home of San Francisco. I've got no complaints as my meds keep the ms for getting any worse, but they do absolutely nothing for regenerating any new or fixing any damaged nerve endings. my hands and feet have been numb for 3 years, my balance is off enough where i can skate, i have cognitive issues where my short term memory is a little off and i get tired/exhausted after being on my feet for more than 60-90 minutes... no big deal considering that some people wake up blind or paralyzed with this stuff. i still ride my bike daily and physically, i look totally fine and normal...its just my insides are eating themselves alive...
Here are a few links to pass along for both my stupid life blog thing and some info for the liberation procedure in case others who suffer from ms are reading this...

 Check out the links below. I wish Lee the best of luck and hope that this info helps some other folks that may be battling m.s... At the very least check out Lees Blog (the first link it rocks!) and the second one to the Real skateboard company has a video that is well worth the time to see. 

 http://www.onesickrace.com/
http://www.dlxsf.com/summer10/rs/#leebender
http://www.thisisms.com/forum-40.html
http://www.facebook.com/pages/CCSVI-in-Multiple-Sclerosis/110796282297?ref=ts

It also turns out that Lee built what is known (online to dummies like me any how) as "The pope hat bike" or "that bike with the pope hat" and so on. I have always dug this bike and the out of the box mini fairing/bug deflector. So I pilfered these images from the J.J. Hope you don't mind Lee.

To quote some one that has it all figured out C.T.F.S!

This is my brothers work in progress sporting Deep Six Cycles first gen foot pegs, flush mount sight glass bungs and petcock made in house. Brass goodies for the rest of the controls and passenger pegs and our hour glass bars will be installed soon! This bike is a great example of how bikes evolve little by little piece by piece while money is tight and remain daily riders!

That Deep Shine!

Deep Six Cycles Brass foot pegs are 100% made in house here in the USA!!

Quanity And Finish

Foot Peg Set of 2 (Polished) $80.00 Toe Shifter (Polished) $40.00 Brake Peg (Polished) $40.00 Foot Peg Set of 2 (Unpolished) $65.00 Toe Shifter (unpolished) $32.50 Brake Peg (unpolished) $32.50

Style

Dished/ Conventional Spiked