Carnage and the Beast! Oh wait, I mean beauty!

If you have not been paying attention to our posts on other social media you may not have realized that I managed to completely decimate the sprocket cover on my Ironhead Sportster chop.

Here is the carnage! Opps!

I was going to construct a whole new mount/ sprocket cover. But since I just wanted it done so I could ride I buzzed it back together. Hopefully this winter I will be able to get around to ordering up some material and fabbing one up!

Oh and this is just another one of those slammed mornings getting everything shipped out! 

Deep Six Cycles Stainless Rabbit Ears and more!

I made these bars the other week. I still have a set for sale. Polished 1" Stainless Steel Rabbit Ears with Polished manually machined brass pressed on. 3.5 mounting pattern. $285 plus shipping for this pair. Email DeepSixCycles@gmail.com Or check out our online store for more info! deepsixcycles.bigcartel.com
 

 Oh and we can hook you up with pegs for those funky Ironhead and Shovel mounts!

We have been selling quite a few of our brass products with and antiqued finish. See those pegs on the left?

And these antiqued foot pegs and hand grips.

Here are a set of Brass Hexogram Pegs, Brake peg and Grips with a special custom spin.

Just a good ole week. Never meanin no harm...

What have we been up to? Well, really just settling into the new shop with East End Motorsports. Setting up the new spot, arranging, organizing and turning out products.

We still ship Iron Pony Express from time to time.

Wait, could it be? Brass Pegs that fit Ironhead Sportsters and Shovelheads? That's it man, we have them you want them!

Did I mention that we have 1" Brass Foot Pegs for Iron Head Sportsters and Shovelheads? You know the ones you can't get nice pegs for any where. They fit those big ugly male frame mounts!

Here are a whole set of antiqued or "aged" brass hand grips and footpegs! I bet you didn't know we offered so many types of finish on our products.

Here are a few more shots of the pegs. This has been a much requested finish on our brass products lately!  

Here we have our antiqued finish brass pegs on the right with common Harley style mounts on the left. One of our polished brass jockey/suicide shift knobs in the center and our brass "Screw It" footpegs fitted with mounts for Ironhead and Shovelhead Harleys.

Did you know that we still manually machine our parts? I know it's like the 50's never ended!

Some times we get requests to produce a part based on one we offer already but with a little twist to fit our customers needs or taste. Take this set of Deep Six Cycles Hexogram brass handgrips. They feature a double hex on one end.

Yes I know only old guys do it this way. Finishing up more parts and they are gone, gone, gone!

I was forced to go down town the other day... Strangely The Cobblers Shoe (my bike) didn't have anything to do with my morning in traffic court.

Shots in the dark.

I find myself shooting photos of things. Some of the time these things make it to instagram or various other forms of social media, often times they are posted one place and never make it to the blog. Here are a few photos from last week. I tend to take a lot of the shop stuff for granted just because I see it every day and never think to shoot it. There are probably a lot of missed opportunity's.     

 

This clutter of the day is a bunch of material in different stages of machining, or just finished.

Here is the finished bore for a set of brass grips with a Joker Machine throttle tube being test fit. P.S. they run a bit small.

 

These would be our finished Brass Grips with the Joker Machine Throttle tube installed

Just an ole handle bare fixture.

 

Just the ole splitting of an ole handle bar fixture.

And this ole pic of my ole bike "The Cobblers Shoe" 

6" Hourglass Window Bars

We are still cranking out our signature Deep Six Cycles HourGlass window bars. We have some 6" rise bars in stock. Snatch them up while they are on sale! Or if there is something else you might want us to make for you send us an email and we can discuss what it will take.

DeepSixCycles@gmail.com
http://deepsixcycles.bigcartel.com/products 

Finish

Raw $100.00 USD

Sizes

6" Rise

Bar Size

1"

Pull Back/ Pull Down

30 Degree Pull Down & Slight Roll Back

Top Bar Length

22"

A Deep Six Cycles Equipped Steed. Captured by Frank Bott

  Recently I was lucky enough to have my bike shot by Frank Bott. Who is an amazing photographer and a lot of fun to work with. I feel very flattered that he has gone out of his way to track me down and convince me to let him shoot my bike.
  The interesting thing is this bike is not nearly finished. So I kept telling Frank I was not ready. But Frank was very persistent. And I realized, "what the hell life is short". Plus he suggested involving my family in the shoot and that really sealed the deal for me.
   This bike is at the moment my only personal runner. So that means keeping it up is a primary goal. Every thing else in life comes first over finishing it. And even though its winter I still commute to work on it often. So that makes taking it down to finish it unappealing. I will keep chipping away at it. Bit by bit part by part.

Please note our limited edition first generation D6C Tramper Bars. And the slight variation on our signature brass grips. I will add more hand made super far out chopperrific  parts when I have a little more time to spend on her. I think a top end job is in preparation for spring. So that will set me back. As I know I will be dying to ride after having her down a week or so. I hope you enjoy Frank Botts Photos of my Deep Six Cycles Equipped Chopper!

Frank Bott
Motorcycle Photography by Frank Bott
Facebook Motorcycle Photography by Frank Bott

Monday morning flash back!

Here is a shot I have never really used from an old shoot. You really begin to understand how the polished brass gleams...

XS650 Tracker Pegs Are In Stock Now!!!

Aluminum XS650 Tracker Pegs are back in stock in limited inventory! Buy em from the store the link is below. They may not last long!

Click Here For More Info

Fenders, Fenders, Fenders! (Aka try and catch me shipping)

We have a pile of these 7" Flat Fenders we are selling for 35$! Snatch one up while we have them! We have reduced our prices and they are moving like hot cakes!  These flat fenders were made just for us in a neighboring state! That's right that means these fenders were made right here in the USA! They are perfect for an Old School Chopper, Bobber or any Custom job you can dream up. This heavy gauge fender measures 25 3/4" long and 10 5/8" tall and fits a 16" wheel tire combo very well. Buy one with the PayPal button below or feel free to contact us with any questions you may have.

Customer Built with our Brass Grips

Here is a Picture of a Honda CB our customer sent us a pic of its rocking our 7/8" brass hand grips. Pretty cool little home build.

More Early Mornings and Late Nights!

Ok we have a some 7/8 Brass Hand Grips back in stock! We will be working on the 1" ones next. We have them both with a brushed finish and show quality Polish.

Get Em Here!!!

Early Mornings and Late nights!!!

We got these back instock and ready to go to a lucky home! Hit me up for a special request or grab em at the link below! We also do them for 7/8 bars with or with out Knurling, High Polished or Brushed!

Buy them here!

Making up for lost time!!! (AKA Choppertastic!)

Its back! We just gotta get rolling to build inventory up again. In case you didn't know I packed the shop up into storage when I found out Liz was pregnant with our son and found a job that was slightly more dependable. I always got by just fine but month to month there really was no telling if I could support myself the shop and a whole family... Well I'm back at it running nights and weekends from the house. If you see something you want let me know and I'll try to get it made up for ya!

http://deepsixcycles.bigcartel.com/products

Peg The Impaler (AKA Sharp-N-Pointy!)

Have you ever seen Deep Six Cycles Impaler Pegs or Grips? Keep your distance and mind your manners, these things are fucking dangerous!

Dig em!!!

Shell it out! (AKA One Off Spectacular)

 Spun up a set of these 30mm pegs and grips. Fits Harleys, I think they are radness!

Stay tuned for more goodness!!!